Hola a todos, antes de actualizar al 9.10 el sistema me reconocia las tarjetas SD, ahora n lo hace y no logro montarlo, mas dmesg me da la siguiente información:

[ 5203.983357] mmc1: new SD card at address 0001
[ 5203.983714] mmcblk0: mmc1:0001 SD 973 MiB (ro)
[ 5203.983839] mmcblk0: unknown partition table
[ 5581.876055] CE: hpet increasing min_delta_ns to 15000 nsec
[ 6769.827747] FAT: bogus number of reserved sectors
[ 6769.827753] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 6914.756199] mmc1: card 0001 removed
[ 6918.488745] mmc1: error -110 whilst initialising SD card
[ 7092.192745] mmc1: error -110 whilst initialising SD card
[ 7105.616804] mmc1: error -110 whilst initialising SD card

Si aplico fdisk -l no aparece nada, y mount no me muestra que este siendo observada la memoria, el sistema si reconoce la multilectora de tarjetas, pues a dar el lshw aparece lo siguiente:

*-memory:0 UNCLAIMED
description: FLASH memory
product: ENE PCI Memory Stick Card Reader Controller
vendor: ENE Technology Inc
physical id: 7
bus info: pci@0000:0c:07.0
version: 00
width: 32 bits
clock: 33MHz (30.3ns)
capabilities: bus_master cap_list
configuration: latency=32 maxlatency=4 mingnt=1
resources: memory:f0f00000-f0f0007f
*-generic
description: SD Host controller
product: ENE PCI SmartMedia / xD Card Reader Controller
vendor: ENE Technology Inc
physical id: 7.1
bus info: pci@0000:0c:07.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=sdhci-pci latency=32 maxlatency=72 mingnt=32
resources: irq:16 memory:f0f00400-f0f004ff
*-memory:1
description: FLASH memory
product: ENE PCI Secure Digital / MMC Card Reader Controller
vendor: ENE Technology Inc
physical id: 7.3
bus info: pci@0000:0c:07.3
version: 00
width: 32 bits
clock: 33MHz (30.3ns)
capabilities: cap_list
configuration: driver=sdhci-pci latency=0 maxlatency=72 mingnt=32
resources: irq:16 memory:f0f00100-f0f001ff

Espero alguien pueda ayudarme!!!

Saludos